Sharp CD-DV650W Operator's Manual page 60

continued)
Recording from a CD (CDs)
H
You can record the desired CD using the DIRECT PLAY button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot
be performed.
4
Press the I6 button.
Recording will be paused.
5
Press one of the s 1 - s 5 buttons to select the desired
disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
I Recording starts from side A.
I Recording is started from the selected CD. When the
playback of the last track is finished or the end of the tape
is reached, the CD and the cassette will stop automatically.
I CD playback will start approximately 7 seconds after the
tape starts.
To stop recording:
Press the ■ button.
The CD and tape will stop.
Downloaded From Disc-Player.com Sharp Manuals
Will disappear after short whilst display
3/21/07, 3:11 PM