ZyXEL Communications ZyWall Reference Manual page 79

Table 28 Cellular Status
STATUS
Limited service
Device detected
Device error
Probe device fail
Probe device ok
Init device fail
Init device ok
Check lock fail
Device locked
SIM error
SIM locked-PUK
SIM locked-PIN
Unlock PUK fail
Unlock PIN fail
Unlock device fail
Device unlocked
Get dev-info fail
Get dev-info ok
Searching network
Get signal fail
Network found
Apply config
Device unready
Active
Incorrect device
Correct device
Set band fail
Set band ok
Set profile fail
Set profile ok
PPP fail
Need auth-password
Device ready
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
returned by the service provider in cases where the SIM card is expired, the user failed
to pay for the service and so on; you cannot connect to the Internet.
displays when you connect a 3G device.
a 3G device is connected but there is an error.
the ZyWALL's test of the 3G device failed.
the ZyWALL's test of the 3G device failed.
the ZyWALL was not able to initialize the 3G device.
the ZyWALL initialized the 3G card.
the ZyWALL's check of whether or not the 3G device is locked failed.
the 3G device is locked.
there is a SIM card error on the 3G device.
the PUK is locked on the 3G device's SIM card.
the PIN is locked on the 3G device's SIM card.
Your attempt to unlock a WCDMA 3G device's PUK failed because you entered an
incorrect PUK.
Your attempt to unlock a WCDMA 3G device's PIN failed because you entered an
incorrect PIN.
Your attempt to unlock a CDMA2000 3G device failed because you entered an incorrect
device code.
You entered the correct device code and unlocked a CDMA2000 3G device.
The ZyWALL cannot get cellular device information.
The ZyWALL succeeded in retrieving 3G device information.
The 3G device is searching for a network.
The 3G device cannot get a signal from a network.
The 3G device found a network.
The ZyWALL is applying your configuration to the 3G device.
The 3G interface is disabled.
The 3G interface is enabled.
The connected 3G device is not compatible with the ZyWALL.
The ZyWALL detected a compatible 3G device.
Applying your band selection was not successful.
The ZyWALL successfully applied your band selection.
Applying your ISP settings was not successful.
The ZyWALL successfully applied your ISP settings.
The ZyWALL failed to create a PPP connection for the cellular interface.
You need to enter the password for the 3G card in the cellular edit screen.
The ZyWALL successfully applied all of your configuration and you can use the 3G
connection.
Chapter 6 Interfaces
79