Rip Commands; Ospf Commands - ZyXEL Communications ZyWall Reference Manual

Chapter 6 Interfaces
Table 18 Examples for Different Interface Parameters
BRIDGE
Router(config)# interface br0
Router(config-if-brg)#
description
downstream
exit
ip
ipv6
join
mss
mtu
no
ping-check
shutdown
traffic-prioritize
type
upstream

6.2.4 RIP Commands

This table lists the commands for RIP settings.
Table 19 interface Commands: RIP Settings
COMMAND
router rip
[no] network interface_name
[no] passive-interface interface_name
[no] outonly-interface interface_name
interface interface_name
[no] ip rip {send | receive} version
<1..2>
[no] ip rip v2-broadcast
show rip {global | interface {all |
interface_name}}

6.2.5 OSPF Commands

This table lists the commands for OSPF settings.
Table 20 interface Commands: OSPF Settings
COMMAND
router ospf
[no] network interface_name area ip
68
AUXILIARY
Router(config)# interface aux
Router(config-if-aux)#
authentication
description
dial-timeout
dialing-type
encrypted-password
exit
idle
initial-string
no
password
phone-number
port-speed
shutdown
traffic-prioritize
username
DESCRIPTION
Enters sub-command mode.
Enables RIP for the specified interface. The
for the specified interface.
Sets the RIP direction of the specified interface to in-only. The
command makes RIP bi-directional in the specified interface.
Sets the RIP direction of the specified interface to out-only. The
command makes RIP bi-directional in the specified interface.
Enters sub-command mode.
Sets the send or receive version to the specified version number. The
command sets the send or received version to the current global
no
setting for RIP. See Chapter 9 on page 107
routing protocols.
Enables RIP-2 packets using subnet broadcasting. The
uses multi-casting.
Displays RIP settings.
DESCRIPTION
Enters sub-command mode.
Makes the specified interface part of the specified area. The
command removes the specified interface from the specified area,
disabling OSPF in this interface.
TUNNEL
downstream
exit
ip
ipv6
metric
mtu
no
ping-check
shutdown
traffic-prioritize
tunnel
upstream
command disables RIP
no
for more information about
ZyWALL (ZLD) CLI Reference Guide
no
no
command
no
no