ZyXEL Communications ZyWall Reference Manual page 215

Table 119 Input Values for White and Black list Anti-Spam Commands (continued)
LABEL
rule_number
subject
Use the white list to identify legitimate e-mail and the black list to identify spam e-mail. The
following table describes the commands for configuring the white list and black list. You must use
the
configure terminal
commands.
Table 120 Commands for Anti-spam White and Black Lists
COMMAND
[no] anti-spam white-list activate
[no] anti-spam white-list [rule_number] ip-
address ip subnet_mask {activate|deactivate}
[no] anti-spam white-list [rule_number] e-
mail email {activate|deactivate}
[no] anti-spam white-list [rule_number] mail-
header mail-header mail-header-value
{activate|deactivate}
[no] anti-spam white-list [rule_number]
subject subject {activate|deactivate}
[no] anti-spam black-list activate
[no] anti-spam black-list [rule_number] ip-
address ip subnet_mask {activate|deactivate}
[no] anti-spam black-list [rule_number] e-
mail email {activate|deactivate}
[no] anti-spam black-list [rule_number] mail-
header mail-header mail-header-value
{activate|deactivate}
[no] anti-spam black-list [rule_number]
subject subject {activate|deactivate}
anti-spam tag black-list [tag]
show anti-spam white-list [status]
show anti-spam black-list [status]
show anti-spam tag black-list
[no] anti-spam xheader {white-list | black-
list} mail-header mail-header-value
show anti-spam xheader {white-list | black-
list}
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
The index number of an anti-spam white or black list entry. 1 - X where X is the
highest number of entries the ZyWALL model supports. See the ZyWALL's User's
Guide for details.
A keyword in the content of the e-mail Subject headers. Use up to 63 ASCII
characters. Spaces are not allowed, although you could substitute a question mark
(?). See Section 24.2.3.2 on page 216
command to enter the configuration mode before you can use these
DESCRIPTION
Turns the white list checking on or off. Turn on the white list to
forward e-mail that matches (an active) white list entry without
doing any more anti-spam checking on that individual e-mail.
Adds, edits, or removes a white list entry to check e-mail for a
specific source or relay IP address. Also turns the entry on or off.
Adds, edits, or removes a white list entry to check e-mail for a
specific source e-mail address or domain name. Also turns the
entry on or off.
Adds, edits, or removes a white list entry to check e-mail for
specific header fields and values. Also turns the entry on or off.
Adds, edits, or removes a white list entry to check e-mail for
specific content in the subject line. Also turns the entry on or off.
Turns the black list checking on or off. Turn on the black list to treat
e-mail that matches (an active) black list entry as spam.
Adds, edits, or removes a black list entry to check e-mail for a
specific source or relay IP address. Also turns the entry on or off.
Adds, edits, or removes a black list entry to check e-mail for a
specific source e-mail address or domain name. Also turns the
entry on or off.
Adds, edits, or removes a black list entry to check e-mail for
specific header fields and values. Also turns the entry on or off.
Adds, edits, or removes a black list entry to check e-mail for
specific content in the subject line. Also turns the entry on or off.
Configures a message or label (up to 15 ASCII characters) to add
to the mail subject of e-mails that match an anti-spam black list
entry.
Displays the current anti-spam white list. Use status to show the
activation status only.
Displays the current anti-spam black list. Use status to show the
activation status only.
Show the configured anti-spam black list tag.
Specify the name and value for the X-Header to add to e-mails that
match the ZyWALL's spam white list or black list.
Display the name and value for the X-Header to add to e-mails that
match the ZyWALL's spam white list or black list.
Chapter 24 Anti-Spam
for more details.
215