Command Line Ftp Configuration File Download Example; Zywall File Usage At Startup - ZyXEL Communications ZyWall Reference Manual

Chapter 39 File Manager

39.6.4 Command Line FTP Configuration File Download Example

The following example gets a configuration file named today.conf from the ZyWALL and saves it on
the computer as current.conf.
Figure 29 FTP Configuration File Download Example
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 FTP Server (ZyWALL) [192.168.1.1]
User (192.168.1.1:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> cd conf
250 CWD command successful
ftp> get today.conf current.conf
200 PORT command successful
150 Opening BINARY mode data connection for conf/today.conf (20220
bytes)
226 Transfer complete.
ftp: 20220 bytes received in 0.03Seconds 652.26Kbytes/sec.

39.7 ZyWALL File Usage at Startup

The ZyWALL uses the following files at system startup.
Figure 30 ZyWALL File Usage at Startup
The boot module performs a basic hardware test. You cannot restore the boot module if it is
1
damaged. The boot module also checks and loads the recovery image. The ZyWALL notifies you if
the recovery image is damaged.
The recovery image checks and loads the firmware. The ZyWALL notifies you if the firmware is
2
damaged.
306
1. Boot Module
2. Recovery Image
3. Firmware
ZyWALL (ZLD) CLI Reference Guide