ZyXEL Communications ZyWall Reference Manual page 245

Table 144 object-group Commands: Service Groups (continued)
COMMAND
[no] object-group group_name
[no] description description
object-group service rename group_name
group_name
28.2.2.1 Service Group Command Examples
The following commands create service ICMP_ECHO, create service group SG1, and add
ICMP_ECHO to SG1.
Router# configure terminal
Router(config)# service-object ICMP_ECHO icmp echo
Router(config)# object-group service SG1
Router(group-service)# service-object ICMP_ECHO
Router(group-service)# exit
Router(config)# show service-object ICMP_ECHO
Object name
===========================================================================
ICMP_ECHO
Router(config)# show object-group service SG1
Object/Group name
===========================================================================
ICMP_ECHO
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Adds the specified service group (second group_name) to the specified
service group (first group_name). The
service group from the specified service group.
Sets the description to the specified value. The
description.
description: You can use alphanumeric and
characters, and it can be up to 60 characters long.
Renames the specified service group from the first group_name to the
second group_name.
Protocol Minmum port
ICMP 8
Type Reference
Object 1
Chapter 28 Services
command removes the specified
no
command removes the
no
()+/:=?!*#@$_%-
Maxmum port Ref.
8 1
245