ZyXEL Communications ZyWall Reference Manual page 136

Chapter 16 Firewall
Table 66 Command Summary: Firewall (continued)
COMMAND
firewall6 zone_object {zone_object|ZyWALL} append
firewall6 zone_object {zone_object|ZyWALL} delete
<1..5000>
firewall6 zone_object {zone_object|ZyWALL} flush
firewall6 zone_object {zone_object|ZyWALL} insert
rule_number
firewall6 zone_object {zone_object|ZyWALL} move
rule_number to rule_number
[no] firewall activate
firewall6 append
firewall6 default-rule action {allow | deny | reject} {
no log | log [alert] }
firewall6 delete rule_number
firewall6 flush
firewall6 insert rule_number
firewall6 move rule_number to rule_number
show connlimit6 max-per-host
show firewall6
show firewall6 rule_number
show firewall6 zone_object {zone_object|ZyWALL}
show firewall6 zone_object {zone_object|ZyWALL}
rule_number
show firewall6 status
show firewall6 block_rules
show firewall6 any ZyWALL
[no] firewall6 asymmetrical-route activate
136
DESCRIPTION
Enters the IPv6 firewall sub-command mode to add a
direction specific through-ZyWALL rule or to-ZyWALL
rule to the end of the global rule list. See
page 137 for the sub-commands.
Removes a direction specific IPv6 through-ZyWALL
rule or to-ZyWALL rule.
<1..5000>: the index number in a direction specific
firewall rule list.
Removes all direction specific IPv6 through-ZyWALL
rule or to-ZyWALL rules.
Enters the IPv6 firewall sub-command mode to add a
direction specific through-ZyWALL rule or to-ZyWALL
rule before the specified rule number. See
page 137 for the sub-commands.
Moves a direction specific IPv6 through-ZyWALL rule
or to-ZyWALL rule to the number that you specified.
Enables the IPv6 firewall on the ZyWALL. The
command disables the IPv6 firewall.
Enters the IPv6 firewall sub-command mode to add a
global firewall rule to the end of the global rule list.
See Table 67 on page 137 for the sub-commands.
Sets how the IPv6 firewall handles packets that do not
match any other firewall rule.
Removes a IPv6 firewall rule.
Removes all IPv6 firewall rules.
Enters the IPv6 firewall sub-command mode to add a
firewall rule before the specified rule number. See
Table 67 on page 137 for the sub-commands.
Moves a IPv6 firewall rule to the number that you
specified.
Displays the highest number of IPv6 sessions that the
ZyWALL will permit a host to have at one time.
Displays all IPv6 firewall settings.
Displays a IPv6 firewall rule's settings.
Displays all IPv6 firewall rules settings for the
specified packet direction.
Displays a specified IPv6 firewall rule's settings for the
specified packet direction.
Displays whether or not the IPv6 firewall is active,
whether or not IPv6 asymmetrical route topology is
allowed, and the default IPv6 firewall rule's
configuration.
Displays all the IPv6 firewall rules that deny access.
Shows all the IPv6 to-ZyWALL firewall rules.
Allows or disallows asymmetrical route topology for
IPv6 traffic.
ZyWALL (ZLD) CLI Reference Guide
Table 67 on
Table 67 on
no