ZyXEL Communications ZyWall Reference Manual page 232

Chapter 26 User/Group
Table 135 username/groupname Commands Summary: Settings (continued)
COMMAND
users default-setting [no] user-type <admin
|ext-user|guest|limited-admin|user|ext-group-
user> logon-re-auth-time <0..1440>
show users retry-settings
[no] users retry-limit
[no] users retry-count <1..99>
[no] users lockout-period <1..65535>
show users simultaneous-logon-settings
[no] users simultaneous-logon {administration
| access} enforce
[no] users simultaneous-logon {administration
| access} limit <1..1024>
show users update-lease-settings
[no] users update-lease automation
show users idle-detection-settings
[no] users idle-detection
[no] users idle-detection timeout <1..60>
26.2.3.1 User Setting Command Examples
The following commands show the current settings for the number of simultaneous logins.
Router# configure terminal
Router(config)# show users simultaneous-logon-settings
enable simultaneous logon limitation for administration account: yes
maximum simultaneous logon per administration account
enable simultaneous logon limitation for access account
maximum simultaneous logon per access account
232
DESCRIPTION
Sets the default reauthorization time (in minutes) for each type of
new user. Set it to zero for unlimited reauthorization time. The
command sets the default reauthorization time to thirty.
Displays the current retry limit settings for users.
Enables the retry limit for users. The
retry limit.
Sets the number of failed login attempts a user can have before the
account or IP address is locked out for lockout-period minutes. The
command sets the retry-count to five.
no
Sets the amount of time, in minutes, a user or IP address is locked
out after retry-count number of failed login attempts. The
command sets the lockout period to thirty minutes.
Displays the current settings for simultaneous logins by users.
Enables the limit on the number of simultaneous logins by users of
the specified account-type. The
allows an unlimited number of simultaneous logins.
Sets the limit for the number of simultaneous logins by users of the
specified account-type. The
Displays whether or not access users can automatically renew their
lease time.
Lets users automatically renew their lease time. The
prevents them from automatically renewing it.
Displays whether or not users are automatically logged out, and, if
so, how many minutes of idle time must pass before they are
logged out.
Enables logging users out after a specified number of minutes of
idle time. The command disables logging them out.
no
Sets the number of minutes of idle time before users are
automatically logged out. The
timeout to three minutes.
command disables the
no
command disables the limit, or
no
command sets the limit to one.
no
no
command sets the idle-detection
no
: 1
: yes
: 3
ZyWALL (ZLD) CLI Reference Guide
no
no
command