ZyXEL Communications ZyWall Reference Manual page 169

This table lists the general commands for application patrol.
Table 90 app Commands: Pre-Defined Applications
COMMAND
[no] app activate
[no] app highest sip bandwidth priority
[no] app protocol_name bandwidth-graph
[no] app other protocol_name bandwidth-graph
[no] bwm activate
show app config
show app all
show app all defaultport
show app all statistics
show app {general|im|p2p|stream}
show app im support action
show app protocol_name config
show app protocol_name defaultport
show app protocol_name statistics
show app protocol_name rule rule_number
show app protocol_name rule rule_number statistics
show app protocol_name rule default
show app protocol_name rule default statistics
show app protocol_name rule all
show app protocol_name rule all statistics
show app other config
show app other statistics
show app other rule rule_number
show app other rule rule_number statistics
show app other rule default
show app other rule default statistics
show app other rule all
show app other rule all statistics
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Turns on application patrol. The
application patrol.
Turns the option to maximize the throughput of SIP traffic on
or off.
Sets the specified protocol to display on the bandwidth
statistics graph. The command has it not display on the
no
bandwidth statistics graph.
Sets traffic for unidentified applications to display on the
bandwidth statistics graph. The
on the bandwidth statistics graph.
Globally enables bandwidth management. You must globally
activate bandwidth management to have individual policy
routes or application patrol policies apply bandwidth
management. The command globally disables bandwidth
no
management.
Displays whether or not application patrol is active.
Displays the settings for all applications.
Displays the default port settings for all applications.
Displays statistics for all applications.
Displays protocols by category.
Displays the supported actions of each Instant Messenger
application.
Displays the basic configuration of this application.
Displays the default ports of this application.
Display the statistics of this application.
Displays the rule configuration of this application.
Displays the rule statistics of this application.
Displays the default rule configuration of this application.
Displays the default rule statistics of this application.
Displays the configurations of all the rules for this
application.
Displays all the rule statistics for this application.
Displays the basic configuration for other applications,
Displays statistics for other applications.
Displays the rule's configuration.
Displays the rule's statistics.
Displays the default rule's configuration.
Displays the default rule's statistics.
Displays the configurations of all the rules for other
applications.
Displays all the rule statistics for other applications.
Chapter 20 Application Patrol
command turns off
no
command it not display
no
169