ZyXEL Communications ZyWall Reference Manual page 135

Table 66 Command Summary: Firewall (continued)
COMMAND
firewall zone_object {zone_object|ZyWALL} delete
<1..5000>
firewall zone_object {zone_object|ZyWALL} flush
firewall zone_object {zone_object|ZyWALL} insert
rule_number
firewall zone_object {zone_object|ZyWALL} move
rule_number to rule_number
[no] firewall activate
firewall append
firewall default-rule action {allow | deny | reject} { no
log | log [alert] }
firewall delete rule_number
firewall flush
firewall insert rule_number
firewall move rule_number to rule_number
show connlimit max-per-host
show firewall
show firewall rule_number
show firewall zone_object {zone_object|ZyWALL}
show firewall zone_object {zone_object|ZyWALL}
rule_number
show firewall status
show firewall block_rules
show firewall any ZyWALL
[no] connlimit6 max-per-host <1..8192>
firewall6 rule_number
firewall6 zone_object {zone_object|ZyWALL} rule_number
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Removes a direction specific through-ZyWALL rule or
to-ZyWALL rule.
<1..5000>: the index number in a direction specific
firewall rule list.
Removes all direction specific through-ZyWALL rule or
to-ZyWALL rules.
Enters the firewall sub-command mode to add a
direction specific through-ZyWALL rule or to-ZyWALL
rule before the specified rule number. See
page 137 for the sub-commands.
Moves a direction specific through-ZyWALL rule or to-
ZyWALL rule to the number that you specified.
Enables the firewall on the ZyWALL. The
disables the firewall.
Enters the firewall sub-command mode to add a
global firewall rule to the end of the global rule list.
See Table 67 on page 137 for the sub-commands.
Sets how the firewall handles packets that do not
match any other firewall rule.
Removes a firewall rule.
Removes all firewall rules.
Enters the firewall sub-command mode to add a
firewall rule before the specified rule number. See
Table 67 on page 137 for the sub-commands.
Moves a firewall rule to the number that you specified.
Displays the highest number of sessions that the
ZyWALL will permit a host to have at one time.
Displays all firewall settings.
Displays a firewall rule's settings.
Displays all firewall rules settings for the specified
packet direction.
Displays a specified firewall rule's settings for the
specified packet direction.
Displays whether or not the firewall is active, whether
or not asymmetrical route topology is allowed, and
the default firewall rule's configuration.
Displays all the firewall rules that deny access.
Shows all the to-ZyWALL firewall rules.
Sets the highest number of IPv6 sessions that the
ZyWALL will permit a host to have at one time. The
command removes the setting.
no
Enters the IPv6 firewall sub-command mode to set a
firewall rule. See Table 67 on page 137
commands.
Enters the IPv6 firewall sub-command mode to set a
direction specific through-ZyWALL rule or to-ZyWALL
rule. See Table 67 on page 137
commands.
Chapter 16 Firewall
Table 67 on
command
no
for the sub-
for the sub-
135