ZyXEL Communications ZyWall Reference Manual page 241

Table 141 object-group Commands: Address Groups (continued)
COMMAND
[no] description description
object-group address rename group_name
group_name
27.2.2.1 Address Group Command Examples
The following commands create three address objects A0, A1, and A2 and add A1 and A2 to
address group RD.
Router# configure terminal
Router(config)# address-object A0 192.168.1.1
Router(config)# address-object A1 192.168.1.2-192.168.2.20
Router(config)# address-object A2 192.168.3.0/24
Router(config)# object-group address RD
Router(group-address)# address-object A1
Router(group-address)# address-object A2
Router(group-address)# exit
Router(config)# show object-group address
Group name
Description
===========================================================================
TW_TEAM
RD
Router(config)# show object-group address RD
Object/Group name
===========================================================================
A1
A2
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Sets the description to the specified value. The
description.
description: You can use alphanumeric and
characters, and it can be up to 60 characters long.
Renames the specified address group from the first group_name to the
second group_name.
Reference
5
0
Type Reference
Object 1
Object 1
Chapter 27 Addresses
command clears the
no
()+/:=?!*#@$_%-
241