Servo1 Automatic Adjustment - Sony CBK-HD01 Maintenance Manual

8-3. Servo1 Automatic Adjustment

n
Make this adjustment with the loader assembly detached.
Fixtures
. Alignment disc (PFD23A-RS)
. Weight (50 to 100 g)
Adjustment Procedure
1. Display the adjustment items referring to Section 8-1-3.
2. Select "SERVO_1" by turning the MENU knob, and
press the MENU knob. A confirmation screen appears.
3. Select "YES" by turning the MENU knob, and press
the MENU knob.
SERVO_1
ADJUST START?
*YES
NO
A confirmation screen appears.
SERVO_1
SET ALIGNMENT DISC
PFD23A-RS.
ADJUST START?
*YES
NO
4. Select "YES" by turning the MENU knob.
5. Open the shutter of the cartridge of the alignment disc
using the following procedure.
Be sure to close it after the adjustment.
n
Opening the shutter of the cartridge by hand is limited
to the optical drive alignment.
Do not open it for any other purpose or touch the disc
in the cartridge.
How to Open
Open the shutter a little in the direction of the arrow
while pressing the claw. Then move the gear by hand
until the shutter is completely opened.
8-2
How to Close
Move the gear in the direction of the arrow until the
shutter is closed and the claw snaps.
Cartridge
6. Set the cartridge with its shutter opened so that its
guide holes are aligned with the two guide shafts of the
unit.
7. Put the weight on the cartridge.
Weight
Guide holes
Guide shafts
8. Press the MENU knob. The result appears.
SERVO_1
ADJUSTING...COMPLETED
Shutter
Gear
Open
Close
Claw
Cartridge
PDW-700/V1 (E)