4-10-7. SLIDER-AUTO TEST
This menu allows you to check optical block assembly
operations and the limit sensor.
Menu hierarchy:
[DRIVE MAINTENANCE]
→ [CHECK]
→ [SLIDER]
→ [AUTO TEST]
1. A confirmation screen appears.
2. Select "YES" by turning the MENU knob, and press
the MENU knob.
AUTO TEST
CHECK START?
*YES
NO
The result appears.
AUTO TEST
CHECKING...OK
If failed:
The following screen appears.
AUTO TEST
CHECKING...ERROR
PDW-700/V1 (E)
4-10-8. IN-LIM TEST
This menu allows you to move the optical block assembly
to the inner-limit position of the disc.
Menu hierarchy:
[DRIVE MAINTENANCE]
→ [CHECK]
→ [SLIDER]
→ [IN-LIM TEST]
1. A confirmation screen appears.
2. Select "YES" by turning the MENU knob, and press
the MENU knob.
IN-LIM TEST
CHECK START?
*YES
NO
The result appears.
n
Check visually that the optical block assembly moves
to the inner-limit position.
IN-LIM TEST
CHECKING...OK
If failed:
The following screen appears.
IN-LIM TEST
CHECKING...ERROR
4-91