Sony CBK-HD01 Maintenance Manual page 237

Recommended replacement parts
ID Part name
1 Cover BNC (PH3)
3 Eye cup kit (RP)
4 Wind screen
5 Filter unit, optical
6 Cover (handle), connector
7 Protector
8 Cover, headphone jack
9 Cover (XLR), drop protection
10 Cap ME
11 Foot, rubber
12 Pad assembly, shoulder
13 GEL, MIC
14 Tape (A)
15 Light connector cover
16 Holder lens mount
17 Battery connector
18 Ring, mount
19 Collar, suspension
20 Cover bottom, handle
21 VTR start button
* : When the part is replaced, apply the instant adhesive (Loctite 408 or equivalent) to the whole area of the flange from the back side with care not to ooze out
to cosmetic surface.
PDW-700V1 (E)
Sony part No. Recommended replacement timing
3-870-160-01 Check for deformation and deterioration (abraded or damaged or lost) from
time to time.
A-8319-943-B
Replace it as necessary.
A-1096-362-A
1-788-765-11 It can become nebulous (intransparent and whitened) with elapse of time.
Then it will not meet the required characteristics. Replace it as needed.
Check for deformation and deterioration (abraded or damaged or lost) from
3-870-237-01
time to time.
3-870-158-01
Replace it as necessary.
3-870-140-01
3-870-246-02
3-870-253-02
3-723-097-01
A-8279-878-G
3-854-132-01
3-941-343-01
3-877-892-01
3-796-982-02
1-820-459-21
3-186-442-01 Replace every 5 years.
3-654-615-02 Check for deformation and deterioration (abraded or damaged or lost) from
time to time.
3-796-975-02
Replace it as necessary.
3-986-632-02 Replace every about 3 years, or check for deformation and deterioration
(abraded or damaged or lost) from time to time.
Replace it as necessary.
*
6-7