4-10-9. OUT-LIM TEST
This menu allows you to move the optical block assembly
to the outer-limit position of the disc.
Menu hierarchy:
[DRIVE MAINTENANCE]
→ [CHECK]
→ [SLIDER]
→ [OUT-LIM TEST]
1. A confirmation screen appears.
2. Select "YES" by turning the MENU knob, and press
the MENU knob.
OUT-LIM TEST
CHECK START?
*YES
NO
The result appears.
n
Check visually that the optical block assembly moves
to the outer-limit position.
OUT-LIM TEST
CHECKING...OK
If failed:
The following screen appears.
OUT-LIM TEST
CHECKING...ERROR
4-92
4-10-10. SPINDLE MOTOR-AUTO TEST
This menu allows you to check spindle motor operations.
Menu hierarchy:
[DRIVE MAINTENANCE]
→ [CHECK]
→ [SPINDLE MOTOR]
1. A confirmation screen appears.
2. Press the MENU knob.
DRIVE MAINTENANCE
CHECK
SPINDLE MOTOR
*AUTO TEST
A confirmation screen appears.
3. Select "YES" by turning the MENU knob, and press
the MENU knob.
AUTO TEST
CHECK START?
*YES
NO
A screen to insert a cartridge appears.
AUTO TEST
INSERT DISC.
4. Insert a cartridge.
The result appears.
AUTO TEST
CHECKING...OK
PDW-700/V1 (E)