Sony CBK-HD01 Maintenance Manual page 145

UP CONVERTER Display (Setting on Upconverter)
M24 UP CONVERTER
UP CON PROCESS
UC DETAIL LEVEL :
UC CRISPENING
UC DETAIL LIMIT :
UC LV DEPEND LVL:
UC DTL FREQUENCY:
UC DTL H/V RATIO:
Item
UP CON PROCESS
UC DETAIL LEVEL
UC CRISPENING
UC DETAIL LIMIT
UC LV DEPEND LVL
UC DTL FREQUENCY
UC DTL H/V RATIO
PDW-700/V1 (E)
TOP
: ADPT
0
: 0
0
0
5.0M
0
Setting
FIELD/ADPT
(_99 to 99)
(_8 to 7)
(_99 to 99)
(_8 to 7)
3.2M/4.5M/5.0M/4.0M
(_3 to 4)
Function
Selects the conversion source picture when SD is
upconverted to HD
FIELD : Use the field picture
ADPT : Optimize the ratio of conversion from the
frame or field picture
Adjusts the sharpness of edge enhancement by the
upconverter
Sets the amplitude width at which the upconverter
does not emphasize low-amplitude signals
Sets the maximum level of edge enhancement by the
upconverter
Sets the luminance of edge enhancement by the
upconverter
Sets the center frequency and frequency properties of
edge enhancement by the upconverter
3.2M : 3.2 ± 1.1 MHz
4.5M : 4.5 ± 1.4 MHz
5.0M : 5.0 ± 0.7 MHz
4.0M : 4.0 ± 2.0 MHz
Sets the horizontal/vertical ratio of edge enhancement
by the upconverter
4-55