Adjusting Battery End Detection Voltage - Sony CBK-HD01 Maintenance Manual

4-14. Adjusting Battery End Detection
Voltage
Before starting adjustment, refer to "9-1. Preparation".
Devices and tools
For more details, refer to "1-10-2. Measuring Equipment".
. Rated voltage power source (one that can output at least
10 A)
. Digital voltmeter
. Blank disc
Adjustment Procedure
1. Supply a +12 V voltage to the DC IN connector.
2. Insert a blank disc for recording into the unit, press the
REC START button, and begin recording.
3. Execute POWER A/D ADJUST from the page of
VDR MAINTENANCE of the SERVICE menu.
POWER A/D ADJUST
ADJUST START?
YES NO
4. Turn the MENU knob to select "YES" and press the
MENU knob.
POWER A/D ADJUST
ADJUST COMPLETE.
ADJ DATA:
5. After adjustment finishes, press down on the MENU
ESCAPE switch.
n
If the message "ADJUST ERROR" appears in the
adjustment result menu, recheck whether a +12 V
voltage is supplied to the DC IN connector and repeat
the adjustment from step 3.
PDW-700/V1 (E)
0.02[V]
4-103