Sony CBK-HD01 Maintenance Manual page 172

HOURS METER 2
S21 HOURS METER2
RESET METER
OPERATION
LASER
OPERATION (rst): XXXXXH
SPINDLE (rst): XXXXXH
LOADING (rst): XXXXX
SEEK (rst): XXXXXH
Refer to "6-4. Digital Hours Meter" for the description of HOURS METER 2 page.
Item Setting
RESET METER Press the MENU knob
to move to the RESET
METER display
OPERATION Display only
LASER Display only
OPERATION (rst) Display only
SPINDLE (rst) Display only
LOADING (rst) Display only
SEEK (rst) Display only
4-82
TOP
: EXEC
: XXXXXH
: XXXXX
Function
Resets the hours meters
OPERATION (operation time display) mode
Accumulates the time during which the power is turned on, and displays
the value by an hour
LASER PARAMETER (optical block assembly light output time display)
mode
Accumulates the time (laser-illuminated hours) during which the light is
being emitted, and displays the value by an hour. Resettable
The value can be used as a reference to when the next periodical
replacement should be
OPERATION (operation time display) mode (resettable)
This is the same function as the OPERATION mode above, but is resettable
By resetting it after replacing a part, the value can be used as a reference
to when the next periodical replacement should be
SPINDLE RUNNING (spindle motor rotation time display) mode (resettable)
Accumulates the time during which the spindle is rotating, and displays the
value by an hour. Resettable.
By resetting it after replacing a spindle, the value can be used as a
reference to when the next replacement should be
LOADING COUNTER (number of times of disc insertion display) mode
(resettable)
Accumulates and displays the number of times of disc insertion. Resettable.
By resetting it after replacing a loader assembly, the value can be used
as a reference to when the next periodical replacement should be
SEEK RUNNING (optical-head seek operation time display) mode
(resettable)
Accumulates the seek operation time of the optical head, and displays the
value by an hour. Resettable.
By resetting it after replacing a seek motor, the value can be used as a
reference to when the next replacement should be
PDW-700/V1 (E)