Matching Connectors; Signal Inputs And Outputs - Sony CBK-HD01 Maintenance Manual

1-3. Matching Connectors

Use the following connectors at the ends of the cables
when connecting the cables during installation and mainte-
nance, or alternately use the following cables.
Panel indication Matching connectors/cables
GENLOCK IN
TC IN 1-569-370-12
TC OUT Plug, BNC
TEST OUT
SDI IN
SDI OUT 1
SDI OUT 2
AUDIO IN CH1/CH2 1-508-084-00 XLR 3-pin, male
AUDIO OUT Audio cable
(XLR 5 pin-XLR 3-pin, 2 m)
CCXA-53 made by Sony or equivalent
DC IN 1-508-362-00 XLR 4-pin, female
DC OUT 12 V 1-566-425-11 round type 4-pin, male
EARPHONE Mini jack (commercially available
on market)
LIGHT Power tap (OE)
Made by ANTONBAUER Inc.,
33710 or equivalent
MIC IN 1-508-370-11 XLR 5-pin, male
NETWORK 100 BASE-TX
REMOTE 1-766-848-11 round type 8-pin, male
VF Connector, 20-pin, male
Hirose HR 12-14PA-20PC or equivalent
i.LINK DV cable (6-pin-4-pin) : CCFD-3L
DV cable (6-pin-6-pin) : CCF-3L
WIRELESS WRR-855A, DWR-S01D (by Sony) only
RECEIVER IN connectable
n
Do not connect with a connector/
cable other than above.

1-4. Signal Inputs and Outputs

Inputs
GENLOCK IN : BNC type 1.0 V p-p, 75 Z unbalanced
TC IN : BNC type 0.5 V to 18 V p-p, 10 kZ
SDI IN (Option) : BNC type
Outputs
BNC type 1.0 V p-p, 75 Z unbalanced
TEST OUT :
SDI OUT : BNC type SDI 0.8 V p-p, 75 Z,
270 Mbps, 1.5 Gbps
TC OUT : BNC type 1.0 V p-p, 75 Z
8 Z or more, _∞ to _18 dBu variable
EARPHONE :
1-20
DC IN : XLR, 4-pin (Male)
1
2
_ _ _ _ _ EXT VIEW _ _ _ _ _
No. Signal I/O
1 GND _
_
2
3 _
4 BATT OUT (+) IN
AUDIO IN CH-1, CH-2 : XLR, 3-pin (Female)
2
_ _ _ _ _ EXT VIEW _ _ _ _ _
MIC/LINE INPUT
No. Signal I/O
1 MIC/LINE (G) _
2 MIC/LINE (X) IN
3 MIC/LINE (Y) IN
AES/EBU INPUT
No. Signal I/O
1 AES/EBU (G) _
2 AES/EBU (X) IN
3 AES/EBU (Y) IN
4
3
Specifications
GND for BATT OUT (+)
No connection
No connection
+11 to 17 V dc
1
3
(0 dBu = 0.775 V rms)
Specifications
_60 dBu/+4 dBu, selectable
High impedance, Balanced
Specifications
1 Vp-p, 110 Z, Balanced
PDW-700/V1 (E)