7. When the update is completed normally, the following
message that prompts you to turn on/off the power
appears. Tally changes from blinking to light on.
PACKAGE UPDATE
Valid after power off.
CURRENT
VERSION
1.00
COMPLETED.
Total time : 20:00
8. When the power is turned off and the unit is restarted,
the firmware version is updated.
n
If the firmware could not be updated to new version or
if an error is displayed upon completion of version
update, it indicates that the firmware version update
has failed. Repeat the version update by following step
2 through step 8 again.
1-50
NEW
VERSION
1.10
PDW-700/V1 (E)