Honeywell VX6 Reference Manual page 334

314
Message
Exit password timeout
Exit restart app timer
Exit TaskbarScreenMode
Exit ToAdmin
Exit ToUser
Exit ToUser-Registry read failure
Exit verify password-no pwd set
Exit verify password-response from
dialog
Found taskbar
Getting address of keyboard hook
init procedure
Getting configuration from registry
Getting encrypt pwd length
Hook wndproc failure
Hook wndproc of open app failure
Hot key event creation failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message received
VX6 Reference Guide
Explanation and/or corrective action
Exiting password timeout processing.
Processing is at the end of the timer function
Exiting the function that switches the screen mode back
to normal operation for the administrator.
Exiting the function that handles the mode switch into
admin mode.
Exiting the user mode switch function.
The AppName value does not exist in the registry so
user mode cannot be entered.
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that
AppLock can disable it in user mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the
registry. This occurs at initialization and also at entry
into user mode. The registry must be re-read at entry
into user mode in case the administration changed the
settings of the application being controlled.
The length of the encrypted password is being
calculated.
AppLock is unable to lock the application. This could
happen if the application being locked encountered an
error after performing its initialization and shut itself
down prior to being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey
notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey
configuration the hotkey controller must be notified.
This notification failed.
The user just pressed the configured hotkey.
AppLock Error Messages
Level
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_PROCESSING
E-EQ-VX6RG-F