Administrator Control - Honeywell VX6 Reference Manual

88

Administrator Control

Access:
Use this option to set parameters for computers intended to be used as dedicated, single (or multi)
application devices. In other words, only the application(s) or feature(s) specified in the AppLock
configuration by the Administrator are available to the user.
LXE devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the device is first booted, the user has full access to the device and no
password prompt is displayed. After the administrator specifies an application to lock, a password
is assigned and the device is rebooted or the hotkey is pressed, the device switches to end-user
mode.
AppLock also contains a component which sets configuration parameters as specified by the
Administrator.
To set the AppLock parameters, please see Chapter 6, "AppLock" for details.
VX6 Reference Guide
Start | Settings | Control Panel | PC Connection
Control Panel Options
E-EQ-VX6RG-F