Chapter 4 Scanner; Introduction - Honeywell VX6 Reference Manual

Introduction

Access:
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
S
3
The COM3 port is labeled "COM2/3".
E-EQ-VX6RG-F

Chapter 4 Scanner

Start | Settings | Control Panel | Scanner
Factory Default Settings
Main
Port 1
Port 2
Send key messages WEDGE
Enable Internal Scanner Sound
On Delay Ms
COM Ports
Baud Rate
Parity
Stop Bits
Data Bits
Power on Pin 9
Barcode
Enable Code ID
Symbology
Symbology
Enable
Min
Max
Add Prefix
Add Suffix
Strip Leading
Strip Trailing
Strip CodeID
Strip Barcode Data
Control Character
Translate All
Control Characters
Scanner control panel options may vary with software revision level. To identify
the software revision, please click on the "About" icon in the Windows CE Control
Panel.
COM1
Disabled
Enabled
Enabled
3000
3
COM1 COM3
9600 9600
None None
1 1
8 8
On Off
None
All
Checked
1
all
Disabled
Disabled
Disabled, 0 Characters
Disabled, 0 Characters
Disabled
Disabled
Disabled
None assigned
VX6 Reference Guide