Figure 4-8 Symbology List With Custom Id - Honeywell VX6 Reference Manual

160
Custom Code IDs are displayed in the Symbology pulldown box.
If AIM or Symbol Code ID is selected from the Enable Code ID pulldown list, the custom IDs
appear at the end of the symbology list.
If Custom is selected from the Enable Code ID pulldown list, only the custom IDs appear in the
symbology list.
If None is selected from the Enable Code ID pulldown list, custom IDs are ignored.
Note:
When the Code ID strip feature is enabled (please see "Step 1: Check Code ID and "Step 9: Add
Code ID" later in this section), the entire custom ID string specified in the ID Code textbox earlier
is treated as the Code ID and stripped.
VX6 Reference Guide

Figure 4-8 Symbology List with Custom ID

Custom symbologies appear at the end of the Symbology pulldown list, but are processed
at the beginning of the list. This allows a custom ID based on a predefined Code ID to
be processed before the predefined Code ID.
Barcode
E-EQ-VX6RG-F