Connection - Honeywell VX6 Reference Manual

140

Connection

Avalanche
Server Address
Check Serial
Connection
Disable
ActiveSync
VX6 Reference Guide
Scan Config This option allows the user to configure Enabler settings using a
special barcode that is created by the Avalanche Mobility Center
Console. Not currently supported by LXE.
Display Set up the Windows display at startup, on connect and during normal
mode. The settings can be adjusted by the user.
Shortcuts Add, delete and update shortcuts to user-allowable applications.
Adapters Enable or disable network and wireless settings. Select an adapter and
switch between the Avalanche Network Profile and manual settings.
Status View the current adapter signal strength and quality, IP address, MAC
address, SSID, BSSID and Link speed. The user cannot edit this
information.
Figure 3-35 Connection Options
Enter the IP Address or host name of the Mobile Device Server assigned to
the mobile device
Indicates whether the Enabler should first check for serial port connection to
the Mobile Device Server before checking for a wireless connection to the
Mobile Device Server.
Disable ActiveSync connection with the Mobile Device Server.
Wavelink Avalanche Enabler Configuration
E-EQ-VX6RG-F