Honeywell VX6 Reference Manual page 309

Creating Custom Key Maps for the VX6
Key codes are defined by COLxROWx=scancode. Scancode has a number of options, as
follows:
VK_code
'x'
SHIFT+VK_code
SHIFT+ 'x'
ACTION+code
CHANGE+mapname
OPEN
Valid ACTION codes are as follows:
SCAN1
SCAN2
SCAN3
POWER
BACKLIGHT
Note that specifying the power button in a different location will affect suspend/resume functions.
The "15-second hold to force reboot" function is controlled by hardware, and will only work with
the default power button.
Note:
E-EQ-VX6RG-F
any valid Windows VK code (see below for valid codes)
a single ASCII character ('A', 'b', '1', '@', ' ', etc.)
for a shifted VK code (see below for valid codes)
for a shifted ASCII character (should not be needed)
special function key (valid codes listed below)
for modifier keys, change keymaps to mapname, as specified above
an unused key position, does nothing when pressed
Scan key 1 (N/A on VX6)
Scan key 2 (N/A on VX6)
Handle trigger button (unused on VX6, but specified)
power button
backlight on/off function
Suspend/resume is NOT supported on the VX6.
289
VX6 Reference Guide