Figure 4-5 Disable Scan Input Confirmation - Honeywell VX6 Reference Manual

Barcode
The following screen features are used during barcode processing. Please refer to "Barcode
Processing", later in this section, for complete details:
E-EQ-VX6RG-F
•
Enable – Determines if the specified symbology is enabled. Please see "Step 2:
Reject Disabled Symbologies".
When there are no customized symbology settings, and the Enable box is unchecked
while All is selected, a warning message is displayed.

Figure 4-5 Disable Scan Input Confirmation

Click Yes to disable all scan input. Click No to cancel.
If there are customized symbologies and the Enable box is unchecked, all
symbologies are disabled except the customized ones.
•
Min – Specifies the minimum length the barcode data must be in able to be
processed. Please see "Step 3: Check Barcode Length".
•
Max – Specifies the maximum length the barcode data can be in able to be
processed. Please see "Step 3: Check Barcode Length".
•
Prefix – Specifies the string to be added to the beginning of barcode data. Please see
"Step 8: Add Prefix String".
•
Suffix – Specifies the string to be added to the end of barcode data. Please see "Step
11: Add Prefix String".
•
Leading – Specifies the number of characters to strip from the beginning of the
barcode data. Please see "Step 4: Strip Leading Characters".
•
Trailing – Specifies the number of characters to strip from the end of the barcode
data. Please see "Step 5: Strip Trailing Characters".
•
Code ID – Specifies if the Code ID is stripped from the barcode data. Please see "
"Step 1: Check Code ID and "Step 9: Add Code ID"
•
Barcode Data – Specifies specific data to strip from the barcode. Please see "Step 6:
Strip Barcode Data Strings".
157
VX6 Reference Guide