Figure 5-57 Peap Properties, Connect Only If Server Name Ends In - Honeywell VX6 Reference Manual

236
If the ACS server name is correct, click the OK button and the server name field will be filled in
with the correct server name.
The other option is to fill in the correct name
Once the authentication completes the status will change to Authenticated to <SSID> as shown.
Click on the IP Information tab and make sure there is a valid IP address as shown previously in
this section.
VX6 Reference Guide

Figure 5-57 PEAP Properties, Connect Only If Server Name Ends In

Figure 5-58 Wireless Information, Authenticated
Cisco Radio
E-EQ-VX6RG-F