Com Ports; Serial Port Pin 9 - Honeywell VX6 Reference Manual

154

COM Ports

Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.
The COM1 display contains the same parameters as the COM3 Tab. Adjust the settings and click
the OK box to save the changes. The changes take effect immediately.
Note:

Serial Port Pin 9

To configure either COM port to have power (+5V) on Pin 9, check the "Power on pin 9 (+5V)"
checkbox on the appropriate tab. This is required to supply power to an external scanner,
To configure either Com port to have RI on Pin 9, uncheck the "Power on pin 9 (+5V)" checkbox
on the appropriate tab.
VX6 Reference Guide
Figure 4-2 Scanner Properties / COM Port Settings
This panel configures the VX6 for an external scanner. It DOES NOT configure the
tethered scanner. Please refer to the documentation for the tethered scanner for
information on configuring the tethered scanner.
COM Ports
E-EQ-VX6RG-F