Quick Start; Troubleshooting - Honeywell VX6 Reference Manual

4

Quick Start

This section's instructions are based on the assumption that your new system is pre-configured
and requires only accessory installation (e.g. antenna, external keyboard and/or barcode scanner)
and a power source.
In general, the sequence of events is:
The VX6 should be mounted in an area in the vehicle where it:

Troubleshooting

Can't calibrate the
touch screen, change
the date/time or
adjust the volume.
RFTerm opens and
runs upon each cold
reset and warm reset.
VX6 seems to lockup
as soon as it is
warmbooted.
VX6 Reference Guide
1. Install Vehicle Mounting Bracket on vehicle and secure VX6 in Mounting Bracket
Assembly (see "VX6 User's Guide").
2. Connect power cable to the VX6. The power cable can also be connected to a UPS
battery pack, which is then connected to the VX6 (see "VX6 User's Guide").
3. Connect accessories to VX6, e.g. scanner, antenna, etc. (see "VX6 User's Guide).
4. Secure all cables to the VX6 with the Strain Relief Cable Clamps.
5. Turn the VX6 on.
6. When instructed, calibrate the touchscreen (see Chapter 3, "System Configuration").
7. The screen may appear white while applications and drivers are loading. When
complete, set Date and Time (see Chapter 3, "System Configuration").
8. Pair Bluetooth devices.
9. Configure radio (see Chapter 5, "Wireless Network Configuration").
10. Warmboot to ensure all registry settings are saved.
11. Device is ready for use.
•
Does not obstruct the vehicle driver's vision or safe vehicle operation.
•
Can be easily accessed by anyone seated in the driver's seat.
AppLock is installed and running on the mobile device. AppLock
restricts User access to running programs. Changes or modifications
require Administrator access.
Refer to "Chapter 6 – AppLock" for setup and processing information.
Tap File | Exit to close the RFTerm application.
There may be small delays while the wireless client connects to the
network, authorization for Voxware-enabled applications complete,
Wavelink Avalanche management of the VX6 startup completes, and
Bluetooth relationships establish or re-establish.
Quick Start
E-EQ-VX6RG-F