Honeywell VX6 Reference Manual page 216

196
TX Diversity
How to handle antenna diversity when transmitting packets to AP.
Options:
Default:
!
RX Diversity
How to handle antennas diversity when receiving packets from AP.
Options:
Default:
!
Frag Thresh
If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold,
the packet is fragmented (sent as several pieces instead of as one block). Use a low setting in areas
where communication is poor or where there is a great deal of radio interference.
Options:
Default:
RTS Thresh
If the packet size exceeds the specified number of bytes set in the Request to Send (RTS)
threshold, an RTS is sent before sending the packet. A low RTS threshold setting can be useful in
areas where many client devices are associating with the Access Point.
Options:
Default:
LED
The LED on the radio card is not visible to the user when the radio card is installed in a sealed
mobile device.
Options:
Default:
VX6 Reference Guide
Main only = Main antenna only
Aux only = Aux antenna only
On = Use diversity
On
For a VX6 with a single external antenna use Main Only. For a VX6 with dual
external antennas or an internal antenna use On.
Main Only = use main antenna only
Aux Only = use aux. antenna only
On-start on Main = On startup use main antenna
On-start on Aux = On startup use aux antenna
On-start on Main
For a VX6 with a single external antenna use Main Only. For a VX6 with dual
external antennas or an internal antenna use On-start on main.
256 to 2346
2346
0 to 2347
2347
On, Off
Off
Summit Radio
E-EQ-VX6RG-F