Access Control - Samsung SCX-5835 series User Manual

OPTION
• Document Policy: You can set the document
Mailbox Setup
stored in Mailbox to delete or retain documents
after completion. Select On for each option to
delete, Off to retain the data.
• Mail Configuration: You can create, edit, or
delete Mailbox. Enter Mailbox ID, Mailbox
Name, Mailbox Passcode by pressing options.
(See "Using mailbox" on page 7.)
If you set the Notification option to On, you
are notified when a fax is received in
Mailbox. (See "Creating Mailbox" on page 7.)
This feature lets you select the paper tray to use
Output Tray
for receiving a fax.
Set the machine to send a fax in the toll save time
Toll Save
for saving. (See "Sending a fax in toll save time"
on page 8.)
If the fax number you have dialed is the same as
Send Batch
the delay fax number, the machine asks whether
you want to add the documents to the reserved
delay fax. (See "Adding documents to a reserved
delay fax job" on page 4.)
You can forward a sent or received fax to other
Fax Forward
destinations via fax or email. (See "Forwarding a
Settings
fax to other destination" on page 8.)
This setting determines whether the end fax tone
Fax Ending Sound
is on or off. When the fax receiving job is finished,
machine will give an signal sound. (See "Setting
up the fax ending tone" on page 9.)
NETWORK SETUP
You may set up the network with the machine's touch screen. Before doing
that, you must have the relevant information concerning the type of network
protocols and computer system you use. If you are not sure which setting to
use, contact your network administrator to configure this machine to the
network.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Network Setup.
OPTION
Select appropriate protocol and configure
TCP/IP Protocol
parameters to use the network environment.
There are lots of parameters to be set.
Therefore, if you are not sure, leave as is, or
consult the network administrator.
For Macintosh network environments, select this
Apple Talk
option. This option provides packet transmission
Protocol
and routing functionality for networking.
Configure the network transmission speed.
Ethernet Speed
Reverts the network settings to the default values.
Clear Setting
DESCRIPTION
DESCRIPTION
Machine status and advanced feature_ 5
SECURITY
This feature lets you control and lock all outgoing data, or change the
password.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Security.

Access Control

•Using SyncThru™ Web Service, administrators can classify users
into several groups according to each user's role. Each user's
authorization, authentication and accounting will be controlled by
the group's role definition. For example, if a group A only has
authorization to use the copy function, users in group A can only
copy with the machine: they cannot fax or scan. You can set this
feature from SyncThru™ Web Service. Click Security > User
Access Control > Authority.
•When the Single Sign-On (SSO) feature is enabled, users just need
to log in to the service only one time. Then the system
automatically checks the user's authority based on the user ID and
password. The SSO feature is related to all of the security
functions such as authentication, authorization and accounting.
The SSO feature can be configured from SyncThru™ Web
Service. Log in to the SyncThru™ Web Service as an
administrator. (See "Using SyncThru™ Web Service" on page 1.)
And click Security > User Access Control > Authentication>
Options.