Setting The Paper Size And Type; Using The Output Support - Samsung SCX-5835 series User Manual

Glossy
Load one paper to the multi-purpose tray at a time, glossy side facing
up.
• Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
• Recommended media: Glossy paper (A4) for this machine by HP
Superior Paper 160 glossy (Product: Q6616A).

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and fax modes. For
computer printing, select the paper size and type in the application program
you use on your computer. (See "Paper tab" on page 6.)
The settings made from the machine driver override the settings on
the control panel.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
and press OK. (See "Setting the authentication password" on page 1.)
4. Press the General tab.
5. Press the down arrow to switch the screen, press Tray Management.
6. Select tray and its options such as paper size and type.
7. Press OK.
If you want to use special-sized paper-such as a billing paper, select
Custom in the Paper tab in the Printing Preferences. (See "Paper
tab" on page 6.)

USING THE OUTPUT SUPPORT

The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. Pull out the output support and expand it.
If paper coming out of the output try has problems, such as excessive
curl, try printing to the rear cover. The rear cover can only hold one
piece of paper at a time, do not let the papers stack on the rear cover.
Media and tray_ 50