Using Samsung Scan Manager; Set Scan Button Tab - Samsung SCX-5835 series User Manual

Scanning and sending multiple documents to
SMB/FTP server(s) at once
You can make multiple scanning jobs into a single file. And, therefore, you
can send the document with a single access to the server.
When the machine enters power saver mode, the jobs in the segment
list will be deleted to prevent accessing of the unexpected users.
1. Press Scan from the Main screen.
2. Press Scan to Server.
3. Set the scan features in the Advanced, Image, or Output tabs. (See
"Advanced tab" on page 3.)
4. Press the Advanced tab > Job Build.
5. Press On to enable job build function.
•Off: Disables Job Build feature.
•On: Enables Job Build feature.
•Display Between Segments: After executing a segment, the job is
paused with this screen is displayed. Then the user can select to
keep sending a file or stop.
•Delete: Deletes a segment.
•Delete All: Deletes all segments.
•Send All: Sends all segments to scan.
•Add Segment: Adds a new segment.
•Cancel: Removes all segments in the list, and cancels the job.
6. Press Add Segment.
7. Place the originals face up in the DADF or you can use the scanner
glass for one sheet of paper.
8. Press Start to start the scanning job.
9. Repeat step 6 to step 8.
As long as the hard drive capacity of your device remains, you can
add segments without any restriction.
10. After adding segments, press Send All.

USING SAMSUNG SCAN MANAGER

If you have installed the printer driver, Samsung Scan Manager program
has installed too. Start Samsung Scan Manager program to find out about
this program information and the installed scan driver's condition. Through
this program, you can change scan settings and add or delete the folders
where scanned documents are saved in your computer.
The Samsung Scan Manager program can only be used in the
Window and Macintosh system. If you use the Macintosh, See
"Setting scan information in Scan Manager" on page 11.
The scan data can be encrypted to protect the contents from
unauthorized access. You can enable the secured scan feature from
the SyncThru™ Web Service. Log in to the SyncThru™ Web Service
as an administrator. (See "Using SyncThru™ Web Service" on
page 1.) And click Settings > Machine Settings > Scan > Scan
Security > PC Scan Security.
1. From the Start menu, click Control Panel > Samsung Scan Manager.
You can open Samsung Scan Manager by right clicking the Smart
Panel icon in the Windows task bar and seleting Scan Manager.
2. Select the appropriate machine from the Samsung Scan Manager
window.
3. Press Properties.
4. The Set Scan Button tab allows you to change the saving destination
and scan settings, add or delete application program, and format files.
You can change the scanning machine by using the Change Port tab.
(Local or Network)
5. When setting is done, press OK.

Set Scan Button tab

Scan Destination
•Available Destination List: Shows the list of applications currently
linked to scanned images in the PC's registry. Select the program
you want to use and click the right arrow and add to Front Panel
Destination List.
•Front Panel Destination List: Shows the list of applications to open
scanned image.
•Add Application: Allows you to add application you want to use to
Available Destination List,
•Remove Application: Allows you to remove an item added by the
user in the Available Destination List.
•File Format: Allows you to select the form of scanned data to be
Scanning_ 7