Control panel
14
Control Panel
•
When you use the display screen, use your finger only. The screen may be
damaged with a sharp pen or anything else.
• The screen may not operate or may not recognize touch inputs properly :
- If you attach an unauthorized protective film or accessory on the
screen.
- If the screen is covered with dust or any foreign substance.
- If there is any foreign substance between the display screen and
frame or if your other finger is touching the edge of the screen.
- If there is frost or moisture on the edge of the screen or if you touch
the screen with a wet finger.
• When the display screen is scratched or damaged, contact a service
representative.
1
1
Shows the current machine status and prompts
Display screen
during an operation. You can set menus easily
using the display screen.
2
Power LED
Shows the power status of your machine.
3
Turn the power on or off. When the blue LED is on,
the machine is powered on and you can use it. If
(Power / Wakeup)
you turn the machine off, press this button for
button
more than two seconds. Then, confirmation
window appears.
4
Shows the status of your machine (see
Status LED
"Understanding the LEDs" on page 28).
3
2
4
1. Introduction
23