Using Special Copy Features; Selecting The Type Of Originals; Changing The Darkness; Merging Multiple Jobs As A Single Copy - Samsung SCX-5835 series User Manual

Selecting the type of originals

Press the Basic tab and select an appropriate original type.
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when originals are photographs.

Changing the darkness

Press the Basic tab and this defines the degree of darkness. Use left/right
arrows to change the level of light and dark in the printouts.

USING SPECIAL COPY FEATURES

On the Advanced tab or the Image tab of the Copy screen, you can select
specific copy features.

Merging multiple jobs as a single copy

This feature allows you to merge multiple copy jobs into a single copy. For
example, if you need to use the DADF and the scanner glass for a copy job,
you can use this feature. In the picture below, each number means each
segment order.
1 Segment 1 from the DADF.
2 Segment 2 from the scanner glass.
3 Segment 3 from the DADF.
4 Segment 4 from the scanner glass.
5 Segment 5 from the DADF.
When the machine enters power saver mode, the jobs in the segment
list will be deleted to prevent accessing by the unexpected users.
1. Press Copy from the Main screen.
2. Select the tray in Paper Supply.
3. Press the Advanced tab > Job Build.
4. Press On to enable job build function.
•Off: Disables Job Build feature.
•On: Enables Job Build feature.
•Display Between Segments: After executing a segment, the job is
paused with this screen. is displayed Then the user can select to
keep copying or stop.
•Print: Prints the sample page(s) of a segment to confirm the
contents.
•Delete: Deletes a segment.
•Delete All: Deletes all segments.
•Print All: Prints all segments.
•Add Segment: Adds a new segment.
•Cancel: Removes all segments in the list, and cancels the job.
5. Press Add Segment.
6. Place originals, face up, in the DADF, or you can use the scanner glass
with a single original document face down.
7. Press Start on the control panel. Then the machine starts scanning.
8. Repeat step 5 to step 7.
As long as the hard drive capacity of your device remains, you can
add segments without any restriction.
9. After adding segments, press Print All.

ID card copying

The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the original.
This feature is helpful for copying a small-sized item, such as a business
card.
•This copy feature is available only when you place originals on the
scanner glass.
•The size of the 2-sided originals should be smaller than A5, if not,
some of it won't be copied.
Copying_ 4