Understanding The Usb Screen; Scanning To An Usb Memory Device - Samsung SCX-5835 series User Manual

UNDERSTANDING THE USB SCREEN

To use the USB feature, press USB on the main screen. If the screen
displays another menu, press (
When an USB memory is inserted into the USB memory port on your
machine, USB icon shows on the screen.
From the USB screen, press USB Format or, USB Print or, Scan to USB.
• USB Format : You can delete files stored on an USB memory device
one by one or all at once by reformatting the device.
• USB Print : You can directly print files stored on an USB memory
device. You can print TIFF, BMP, JPEG, PDF, and PRN files. (See
"Printing from a USB memory device" on page 95.)
• Scan to USB : You can scan a data and send directly to USB memory
device. You can specify image size, file format, or color mode for each
scanning to USB job. (See "Scanning to an USB memory device" on
page 94.)

SCANNING TO AN USB MEMORY DEVICE

You can scan a document and save the scanned image onto an USB
memory device. When you scan a document, the machine uses the default
settings such as the resolution. You can also customize your own scan
setting. (See "Changing the scan feature settings" on page 94.)
1. Insert a USB memory device into the USB memory port on your
machine.
2. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass.
3. Press USB from the main screen.
4. Press Scan to USB.
5. Set the scan features in the Advanced, Image, or Output tabs. (See
"Changing the scan feature settings" on page 94.)
6. Press Start on the control panel to begin scanning.
7. After scanning is complete, you can remove the USB memory device
from the machine.
CHANGING THE SCAN FEATURE SETTINGS
This part explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, original type, color mode,
darkness, and more. The options you change will be maintained for a
certain time, but after a period, the options will be reset to default values.
) to go to the main screen.
Using USB memory device_ 94
Duplex
This feature especially applies when the original documents to be scanned
are two-sided. You can select whether to scan only one side of the paper or
both sides of the paper.
Press USB > Scan to USB > the Basic tab > Duplex. Use left/right arrows
to toggle the values.
• 1 Sided : For originals that are printed on one side only.
• 2 Sided : For originals that are printed on both sides.
• 2 Sided, Rotate Side 2 : For originals that are printed on both sides.
But the back is rotated 180 degrees.
To use 2 Sided and 2 Sided, Rotate Side 2, you have to load the
originals on the document feeder. Because, if the machine can not
detect the original on document feeder, it automatically changes the
option to 1 Sided.
Resolution
You can adjust document resolution.
Press USB > Scan to USB > the Basic tab >Resolution. Use left/right
arrows to toggle the values. The higher value you select the clear result you
get. But the scanning time may take longer.
Original Size
You can adjust document size.
Press USB > Scan to USB > the Advanced tab > Original Size. Select the
appropriate option and press OK.
Original Type
You can set the original document type in order to enhance the quality of a
document being scanned.
Press USB > Scan to USB > the Image tab >Original Type. Select the
appropriate option and press OK.
• Text : Use for originals containing mostly text.
• Text/Photo : Use for originals with mixed text and photographs.
• Photo : Use when originals are photographs.
Color Mode
Use this option to scan the original in Mono, Gray or Color Mode.
Press USB > Scan to USB > the Image tab > Color Mode. Select the
appropriate option and press OK.
• Color : Displays an image in color. 24 bits per pixel.
• Gray : Displays an image in gray. 8 bits per pixel.
• Mono : Displays an image in black and white. 1 bit per pixel.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.