Changing The Scan Feature Settings; Change Port Tab - Samsung SCX-5835 series User Manual

saved. You can choose among BMP, JPEG, PDF, and TIFF.
Scan Property
•Computer ID: Shows the ID of your computer.
•Save Location: Allows you to choose the location of the default saving
folder.
•Resolution: Allows you to choose the scan resolution.
•Scan Color: Allows you to choose the scan color.
•Scan Size: Allows you to choose the scan size.
•ADF Duplex: Automatically scans both sides. If your model does not
support this option, it will be grayed out.
•Show Preview: Checking this box allows you to preview applied scan
options. You can modify the options before scanning.
•Default: Allows you to go back to default options.

Change Port tab

Local Scanner
Select when your machine is connected via USB or LPT port.
Network Scanner
Select when your machine is connected via network port.
•Auto detection on the network: Automatically detects your machine.
•IP address: Enter in your machine's IP address to detect your
machine.

CHANGING THE SCAN FEATURE SETTINGS

This section explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, type, color mode, darkness, and
more. The settings you change will be maintained for a certain time, but
after that period, the options will be reset to default values.
Duplex
This feature especially applies when the original documents to be scanned
are two sided. You can select whether the machine scans only one side or
both sides of the paper.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Basic tab > Duplex. Use left/right arrows to toggle the values.
• 1 Sided: For originals that are printed on one side only.
• 2 Sided: For originals that are printed on both sides.
• 2 Sided, Rotate Side 2: For originals that are printed on both sides, but
the back is rotated 180 degrees.
To use 2 Sided and 2 Sided, Rotate Side 2, load the originals on the
document feeder. If the machine cannot detect the original on the
document feeder, it automatically changes the option to 1 Sided.
Resolution
You can adjust document resolution.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Basic tab > Resolution. Use left/right arrows to toggle the values. The
higher value you select, clearer the result. But the scanning time may take
longer.
100 dpi, 200 dpi and 300 dpi resolution are available only when Color Mode
is set to Color or Gray.
FEATURE
Scan to Email
Scan to PC
Scan to Server
Original Size
You can specify the scanning area on the originals by selecting the
pre-defined size, putting in the margin value or Auto. If you set this option to
Auto, the machine senses and determines the size of the original.
From the main screen, press Scan > Scan to Email (or Scan to PC or
Scan to Server) > the Advanced tab > Original Size. Use up/down arrows
to go to the next screen. Select the appropriate option and press OK.
Original Type
You can set the original document type in order to enhance the quality of a
document being scanned.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Original Type. Select the appropriate option and press OK.
• Text: For originals that have text or line art.
• Text/Photo: For originals that have both text and photographs together.
• Photo: For originals that are continuous tone photographs.
Color Mode
Use this option to scan the original in Mono, Gray or Color Mode.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Color. Select the appropriate option and press OK.
• Color: Displays an image in color. 24 bits per pixel.
• Gray: Displays an image in gray. 8 bits per pixel.
• Mono: Displays an image in black and white. 1 bit per pixel.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.
Scanning_ 8
RESOLUTION (DPI) FILE FORMAT
100, 200, 300, 400, 600 PDF, Single-Page TIFF,
Multi-Page TIFF, JPEG
100, 200, 300, 400, 600 PDF, TIFF, JPEG
100, 200, 300, 400, 600 PDF, Single-Page TIFF,
Multi-Page TIFF, JPEG