4 5
Section C - Removal & Installation
Food Compartment Light Switch
The food compartment light switch is a Magnetic Reed switch
located on the control board at the top of the food compartment.
REED SWITCH
If the reed switch would fail, the control board will need to be
replaced. Follow control board replacement instructions.
The magnet that operates the Reed Switch is located at the top of the food
door inner door panel.
The magnet can be replaced by removing the screw located at the bottom
of the bracket. Then lift the magnet and cover off the door panel. On some models,
it will be necessary to remove the top bin to get to the magnet.
The bin will lift off in the same manner as the door bins. Lift straight up and out.