Ejector
Water
Water
Ice Storage Bin
Ice Storage Bin
Harvest Cycle
1. Holding Switch in normally open
position.
2. Heater remains energized.
3. Control Arm is rising.
Step 3
Ejector
Ice
Ice Storage Bin
Ice Storage Bin
Harvest Cycle
1. Completing 1st revolution of
Ejector .
2. Water Fill Switch closes, but
heater remains on, preventing
water fill.
Step 5
Section F - Ice Maker
Ejector
Water
Water
Ice Storage Bin
Ice Storage Bin
Harvest Cycle
1. Ejector reaches ice.
2. Motor stalls until ice loosens.
3. Heater remains energized.
Step 4
Ejector
Ice
Ice Storage Bin
Ice Storage Bin
Harvest Cycle
1. End of 1st revolution.
2. Hold Switch opens.
3. Since Thermostat is still closed,
2nd revolution of Ejector begins.
Step 6
103