Steering Column - Mazda 1983 RX7 Service Manual

ARTICLE BEGINNING
1983 STEERING
Mazda - Steering Columns
GLC Wagon, RX7
DESCRIPTION
Steering columns used on these models incorporate a
collapsible steering shaft.
REMOVAL & INSTALLATION

STEERING COLUMN

Removal
1) Disconnect battery ground cable. Remove horn cap. Remove
steering wheel with steering wheel puller. See Mazda in Steering
Wheel & Column Switches article in this section. Remove steering
column covers. Disconnect combination switch coupler and remove
switch.
NOTE: Do not hammer or exert extreme pressure on steering column,
as damage to collapsible section may result.
2) Remove lock assembly. Remove steering column mounting
bolts. Remove steering column jacket.
3) Disconnect center link from pitman arm using puller
(49-0118-850C). Remove pitman arm from sector shaft using puller
(49-0223-695E).
4) Remove steering gear housing attaching bolts. Remove
steering gear housing assembly through engine compartment. See Fig. 1.
Inspection
Check all components for damage or wear. Check steering
shaft for bend or damage.
Installation
To install, reverse removal procedures. Make sure there is
clearance between column cover and steering wheel.
STEERING COLUMN
Article Text
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Sunday, August 26, 2001 08:20PM