Link And Wire Adjustment; Coolant By-Passing The Thermostat/Thermostat Stuck; Blower Unit Linkage Adjustment; Heater Unit Linkage Adjustment - Mazda 1983 RX7 Service Manual

NOTE: Do not perform the above checks with the engine running.
Item 3 - Link and Wire Adjustment
1. Remove the kick panel on the passenger side of the vehicle.
2. Remove the glove box.
3. Place the transmission in park or set manual transmission in
neutral and set the parking brake.
4. Start the engine and allow to idle.
5. Set the climate controls to the following settings:
Temperature
Recirculation-fresh
6. Using Figs. 3 and 4 for reference, ensure the linkages are
adjusted properly.
Fig. 3:

Blower Unit Linkage Adjustment

Fig. 4:

Heater Unit Linkage Adjustment

Item 4 - Coolant By-passing the Thermostat/Thermostat Stuck
HEATING SYSTEM TROUBLESHOOTING CAT. U, NO. 93-04
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Monday, August 27, 2001 06:36AM
...........
...
Article Text (p. 7)
1983 Mazda RX7
Max. hot
fresh