Replacement Of The Catalyst Pellets; Check Valve Position And Orientation - Mazda 1983 RX7 Service Manual

CATALYST PELLETS & MODIFICATION OF SECONDARY AIR SYS
Fig. 13:

Check Valve Position and Orientation

11. Re-install the air control valve.
NOTE: If the gasket cannot be re-used, use new one provided in the
kit.
12. Reconnect the hoses and the hot air duct. Be sure to install
the clamps securely.
IV. Replacement of the Catalyst Pellets
A. Preparation of Exchange Container
As mentioned in Item E of attachment I, the exchange container
is to be partially prepared prior to initiation of the repair on
each individual vehicle. This section describes how to prepare
an exchange container.
CAUTION: * Wait until the catalytic converter has cooled.
* Use protective gloves and a prepared dust mask during
replacement of the pellets.
1. Remove the drain plug No. 1 and No. 2 of the empty catalytic
converter for exchange operation. See Fig. 14.
Article Text (p. 13)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:59AM