Rear Window Defroster Grid Line Repair Procedure; Resin Application Location - Mazda 1983 RX7 Service Manual

REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE CAT. T, NO. 015/95
ARTICLE BEGINNING
TECHNICAL SERVICE BULLETIN
REAR WINDOW DEFROSTER GRID LINE REPAIR
Model(s): All Mazda Models
Category: T - Body Electrical System
Bulletin No.: 015/95
Date Issued: November 14, 1995
Date Revised: December 21, 1995
DESCRIPTION
The following procedure should be used to repair broken grid lines
on rear window defrosters. Place a copy of these procedures in the
appropriate section of the workshop manual.
REPAIR PROCEDURE
1. Turn the defroster switch on with the ignition in the on position.
2. Determine the broken grid line visually or with a test light or
voltage meter.
3. Turn the defroster and ignition Off.
4. Clean the area with a glass cleaner.
5. Remove the protective backing from the stencil.
6. Align both ends of the broken grid line with the opening in the
stencil and press firmly to attach. See Fig. 1
Fig. 1:

Resin Application Location

Article Text
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Monday, August 27, 2001 06:33AM