Rear Bearing Installation; Measuring Clearance Between"C" Washer And Rear Bearing - Mazda 1983 RX7 Service Manual

MANUAL TRANSMISSION SHIM ADJUSTMENTS CAT. J, NO. 001/90
Fig. 8: Rear Bearing Installation (R-Type)
Note: If the "C" washers will not fit into the rear mainshaft groove,
select the proper thickness "C" washers.
washers at this position are the same thickness.
3. Measure the clearance between the "C" washers and mainshaft rear
bearing. See Fig. 9.
If the clearance is not as specified, select the proper "C"
washers.
Standard Clearance:
the vehicle being repaired.
Fig. 9:

Measuring Clearance Between"C" Washer and Rear Bearing

(R-Type)
END OF ARTICLE
Article Text (p. 6)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:44AM
Refer to the appropriate service information for
Ensure both "C"