Installing Protectors For Inner Sealing Rubbers; Positioning Inner Sealing Rubber - Mazda 1983 RX7 Service Manual

Fig. 23:

Installing Protectors for Inner Sealing Rubbers

Apply light coat of petroleum jelly to hold seals in place.
NOTE: Inner sealing rubber is square type. The wider white line of
sealing rubber should face toward combustion chamber and
seam of rubber should be placed as shown in Fig. 24. Do not
stretch sealing rubbers.
3) Invert front rotor housing using care that seals remain in
position, and install on front housing. Lubricate tubular dowels and
insert through front rotor housing holes.
Fig. 24:

Positioning Inner Sealing Rubber

Wider white line of sealing rubber should face toward combustion
chamber.
1.1L ROTARY
Article Text (p. 16)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Sunday, August 26, 2001 04:57PM