Sleep Mode Transition Time; Auto Clear - Kyocera TASKalfa 180 Operation Manual

System Menu
Auto Clear Setting
Set whether or not to automatically return the copier to Ready to copy. state when copying is finished.

Sleep Mode Transition Time

Set the time interval for automatically entering Sleep Mode when copying is completed or after operations have
been finished.
5-22
System Menu:
53.LowPower Time
System Menu:

50.Auto Clear

System Menu:
54.AutoSleepTime
2
Press to select select 53.LowPower
or
Time, and then press the OK key.
3
Press to select a time interval from 1
or
minute to 240 minutes.
NOTE:
The time intervals available are: 1, 5, 15, 30,
45, 60, 90, 120, 180 and 240 minutes.
4
Press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 50.Auto Clear,
or
and then press the OK key.
3
Press to select On in the case where the
or
transition to Auto Clear is to be made or Off when
it is not, and then press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press or to select select
54.AutoSleepTime, and then press the OK key.
3
Press or to select a time interval from 1
minutes to 240 minutes.
OPERATION GUIDE