Calling Time Set Menu Mode (Arbitrary) - Konica Minolta 7020 Service Manual

HOME
[5]

Calling Time Set Menu Mode (Arbitrary)

Select the [9. KRDS setting] key in the 25 mode menu
screen to display the KRDS setting menu screen as an
initial screen.
Then select the [1. Calling time set] key to display the
calling time set menu screen.
Calling time set menu
1. Calling mode-1
2. Calling mode-2
3. Calling mode-3
Press the [RETURN] key to exit the calling time set menu
screen and return to the KRDS setting screen.
This host calling setting calls everything to the "Host
*
2".
Therefore, it is necessary first to set the "Host 2"
telephone No. and host password.
1. Setting calling time setting mode
This function sets designated date calling.
(1) Screen selection
Select the [1. Calling mode-1] (Setting designated
date calling setting) in the calling time set menu
screen to display the calling mode-1 (designated date
calling) setting screen.
Press the [RETURN] key to exit the calling mode-1
(designed date calling) setting screen and return to
the calling time set menu screen.
(2) Entering method
a. Enter year, month, day and time using the numeric
keys.
b. The cursor that indicates entering position will be
appeared in the message indication area at line 2.
c. Using the [<<], [>>] key and move the cursor to
desired position.
d. If reenter the entered data, press the Stop/clear
button to clear the entered data then enter the data
again.
e. Enter year, month, day and time using the numeric
keys, then press the [SET] key.
f. Enter year, month, day and time as follows.
• The year is entered by inputting 4-digit in the
Christian era.
• The month and day are entered by inputting 2-digit
number. (Example: 1 is entered as 01.)
• The time is entered using 24 hour clock.
(Example: 1:00p.m. is entered as 13.)
• The minute is entered by inputting 2-digit number.
(Example: 1 is entered as 01.)
• Example:
at 1:00 p.m. of January 15, 1998 −>
g. Press the [SET] key every time data for one item
is entered and check the entered data.
h. The screen will return to the calling time setting
menu screen if the [RETURN] key is pressed
without pressing the [SET] key. In this case, no
entered data will be changed.
6-13
KRDS
1998/01/15 13:00