Developing Unit; Screws That Must Not Be Removed; Removing And Reinstalling The Developing Unit - Konica Minolta 7020 Service Manual

HOME

DEVELOPING UNIT

[1]

Screws That Must Not be Removed

Caution: The 4 set screws below must not be
2
removed or adjusted in the field. Please do
not interfere with these screws.
Screw that must not be removed
Screw that must not
be removed
Screws that must not
be removed
[2] Removing and Reinstalling the
Developing Unit
a. Procedure
(1) Remove the set screw fastening the developing
unit in place.
(2) Pull the developing unit outward to remove.
(3) To reinstall: Fit the rails on the bottom of the
developing unit onto the grooves on the main body,
and slide the unit into place. Then fasten into place
with the attachment screw.
3-G-1
DEVELOPING UNIT
Developing unit
Set screw