47 Mode; Mode Setting Method - Konica Minolta 7020 Service Manual

HOME

47 MODE

[1]

47 Mode Setting Method

1. 47 Mode
This mode provides self-diagnostic functions (input/
output check function) to check and adjustment the
various signals and loads.
Also, 47 mode has a multi mode — it is possible to
check the multiple input/output using one input/
output check code.
2. Operation method (to start 47 mode)
(1) 47 Mode startup
a. Turn the SW2 (sub power) OFF when the SW1
(main power) remain ON.
b. Turn the SW2 (sub power) ON while holding down
4 and 7 of the numeric keys. The 47 Mode Menu
Screen will appear.
This is the 47 mode in which the normal copy
operation becomes disabled.
47 mode menu screen
47 mode message display area
I/O check mode
< 000 - 00 >
Multi code
Input/Output check code
IN : 000 OUT : ----
Input check
Output check
(2) Input check method
a. Using the numeric keys, enter the code input for
the desired signal (sensor, etc.) to check.
b. When using the multi mode, press the
and enter the multi code according to the desired
input check item (signal) with the numeric keys.
Step Operation procedure
1 Enter the 47 mode.
2 [47 mode menu screen]
Using the numeric keys, enter the input check
code (Note 1).
3 When using the multi mode, press the
4 Using the numeric keys, enter the multi code
(Note 1).
5 Input check result will appear in the input check
result display area.
6 To check other signal input check, repeat steps
2 to 5.
Note 1: Refer to "[5] Input check list".
4-79
ADJUSTMENT
47
button
*
button.
*